Calculating the exact amount of asphalt millings you need involves considering the area to be covered, the desired depth, and the material's density, typically yielding about 80 square feet per ton at a 2-inch depth. For a cost-effective and durable solution for driveways, parking lots, and foundations in the DFW area, asphalt crushings offer significant advantages over new asphalt or gravel.
How Much Asphalt Milling Do You Need? Tonnage & Cost Calculator
Planning a construction project, whether it's a new driveway, a sturdy parking area, or a stable foundation, often involves critical decisions about materials and budget. For those in DFW looking for a durable, affordable, and eco-friendly paving solution, asphalt crushings (also known as asphalt millings or recycled asphalt pavement, RAP) present an excellent option. But how much do you actually need, and what will it cost? This guide from Kaufman Sand & Gravel will help you calculate your material needs and understand the pricing structure for our reliable bulk material delivery.
Understanding Asphalt Milling Tonnage and Coverage
Asphalt millings are essentially reclaimed pavement, ground down into an aggregate. They compact extremely well, creating a surface that’s more stable than gravel but significantly cheaper than new asphalt or concrete. To figure out how much you need, you'll need two key measurements: the total square footage of your project area and your desired compacted depth.
General Rule of Thumb:
- A cubic yard of asphalt millings weighs approximately 1.5 tons.
- One ton of asphalt millings, when compacted to a 2-inch depth, covers approximately 80 square feet.
- One ton of asphalt millings, when compacted to a 4-inch depth, covers approximately 40 square feet.
Most residential driveways or light-traffic areas benefit from a compacted depth of 4-6 inches. For heavier traffic, such as commercial parking lots or access roads, a depth of 6-8 inches or more is often recommended.
Calculation Formula:
- Measure your area: Length (feet) x Width (feet) = Total Square Feet (sq ft).
- Determine desired depth: Decide on your compacted depth (e.g., 4 inches).
- Calculate cubic feet: Total sq ft x Desired Depth (in inches) / 12 (to convert to feet) = Total Cubic Feet (cu ft).
- Convert to cubic yards: Total Cubic Feet / 27 (cu ft per cubic yard) = Total Cubic Yards (cu yds).
- Convert to tons: Total Cubic Yards x 1.5 (tons per cubic yard) = Total Tons.
Example: You want to pave a driveway that is 50 feet long and 12 feet wide, with a compacted depth of 6 inches.
- Area: 50 ft x 12 ft = 600 sq ft
- Desired Depth: 6 inches
- Cubic Feet: 600 sq ft x (6 in / 12 in/ft) = 300 cu ft
- Cubic Yards: 300 cu ft / 27 cu ft/cu yd ≈ 11.11 cu yds
- Total Tons: 11.11 cu yds x 1.5 tons/cu yd ≈ 16.67 tons
So, for this project, you would need approximately 17 tons of asphalt millings. When ordering, it's always wise to round up slightly to account for compaction, settling, and minor adjustments.
Comparing Asphalt Crushings to Other Paving Materials
When considering your paving options in the DFW area, it's helpful to compare the benefits and costs of asphalt crushings against traditional alternatives like gravel, new asphalt, and concrete. While prices for all materials fluctuate, we can provide a general comparison of their installed cost per square foot.
| Material Type | Pros | Cons | Est. Cost per Sq Ft (Installed) |
|---|---|---|---|
| Asphalt Millings | Cost-effective, compacts well, low maintenance, durable, eco-friendly. | Not as smooth as new asphalt, may have minor inconsistencies. | $1.00 - $3.00 |
| Crushed Gravel | Very low initial cost, good drainage. | Prone to washouts, needs frequent regrading, dusty, loose material, less stable. | $0.50 - $2.00 |
| New Asphalt | Smooth, aesthetically pleasing, durable. | Higher initial cost, requires professional installation, can crack over time, heat retention. | $3.00 - $7.00 |
| Concrete | Extremely durable, long lifespan, various finish options. | Highest initial cost, prone to cracking if not installed correctly, difficult to repair, can stain. | $4.00 - $12.00 |
Note: These are estimated installed costs and can vary based on project size, site preparation, and current market conditions. Our bulk material delivery service helps keep your material costs down.
As you can see, asphalt millings offer a sweet spot—significantly more durable and stable than gravel, at a fraction of the cost of new asphalt or concrete. For more details on the properties and uses of this versatile material, check out our article on [/what-is-asphalt-milling?-uses-specs-and-when-to-order-it].
Bulk Material Delivery from Kaufman Sand & Gravel
Kaufman Sand & Gravel is your trusted source for bulk material delivery, including asphalt crushings, throughout Scurry, Kaufman County, and the broader DFW region. We make getting your materials easy and affordable.
Delivery Pricing & Details:
- Flat Rate Delivery: For loads up to 7 tons, we offer a flat rate of $150 within 20 miles of Scurry, TX (75158). This covers much of Kaufman County and parts of surrounding areas.
- Beyond 20 Miles: For deliveries outside the 20-mile radius, we charge a metered per-mile rate. Call us for an exact quote.
- Discounts on Multiple Loads: Planning a larger project? Ask us about discounts on multiple material loads.
- Heavy Loads: For loads over 28 tons, specialized dump truck delivery is required. Please call us directly at (951) 239-9096 for a custom quote on these larger orders.
- Service Days: We operate six days a week to serve your project needs. Sundays are available by request.
In addition to asphalt millings, we also provide a range of other bulk materials such as [/services/gravel-delivery], [/services/sand-delivery], and [/services/topsoil-delivery]. Need assistance clearing out a construction site or cleaning a garage? We also offer [/services/garage-clean-out] and dumpster rental services.
Our Service Area for Asphalt Crushings
Kaufman Sand & Gravel proudly serves a wide geographic area in and around DFW, including but not limited to:
- Kaufman County: Scurry, Kaufman, Crandall, Forney, Terrell, Kemp, Mabank (partially)
- Dallas County: Dallas (southern/eastern), Mesquite, Garland, Balch Springs, Seagoville
- Henderson County: Gun Barrel City, Seven Points, Malakoff (partially)
- Ellis County: Ennis, Ferris, Palmer, Bristol
If you're unsure whether your project falls within our standard delivery zone, please don't hesitate to give us a call. You can also visit our [/service-area] page for more information.
Frequently Asked Questions about Asphalt Millings
Q: Are asphalt millings environmentally friendly? A: Yes, using asphalt millings is an excellent way to recycle existing pavement, reducing landfill waste and the need for new aggregate mining. It's a sustainable choice for your project.
Q: Can I install asphalt millings myself? A: Many smaller projects, like driveways or pathways, can be installed by homeowners with the right equipment (e.g., a compactor or roller). Larger or more complex projects, especially those requiring precise grading, may benefit from professional installation.
Q: How do asphalt millings hold up in the Texas heat? A: Asphalt millings perform very well in hot climates. Unlike new asphalt which can soften in extreme heat, millings are already processed and compacted, making them quite stable. Their lighter color compared to fresh black asphalt can also absorb less heat.
Request Your Bulk Material Delivery Quote Today!
Ready to get started on your project with high-quality asphalt crushings? Kaufman Sand & Gravel makes it easy. For precise tonnage calculations, competitive pricing, and reliable delivery right to your job site in the DFW metroplex, contact us today.
Request a delivery quote by calling us at (951) 239-9096 or emailing us at kaufmantrailerrentals@gmail.com. You can also reach out via our [/whats-next] page for a swift response. We look forward to helping you make your project a success!